2008-05-20 11:20
电脑中各种错误信息的中文意思
　　电脑各种错误信息的中文意思
　　尽管现在的中文版系统日趋成熟，然而要实现完全的中文版是不可能的。在错误信息的提示反面很多都是英文提示，这就让人有点恼火了，为此特将部分的翻译给出以飨360的朋友！
　　一、BIOS中的提示信息
　　提示信息说明
　　DriveAerror驱动器A错误
　　Systemhalt系统挂起
　　Keyboardcontrollererror键盘控制器错误
　　Keyboarderrorornokeyboardpresent键盘错误或者键盘不存在
　　BIOSROMchecksumerrorBIOSROM校验错误
　　Singlehardiskcablefail当硬盘使用Cable选项时硬盘***位置不正确
　　FDDControllerFailureBIOS软盘控制器错误
　　HDDControllerFailureBIOS硬盘控制器错误
　　DriverError驱动器错误
　　CacheMemoryBad,DonotEnableCache高速缓存Cache损坏，不能使用
　　Error:UnabletocontrolA20line错误提示：不能使用A20地址控制线
　　Memorywrite/Readfailure内存读写失败
　　Memoryallocationerror内存定位错误
　　CMOSBatterystateLowCMOS没电了
　　Keyboardinterfaceerror键盘接口错误
　　Harddiskdrivefailure加载硬盘失败
　　Harddisknotpresent硬盘不存在
　　Flo ydisk(s)fail(40)软盘驱动器加载失败，一般是数据线插反，电源线没有插接，CMOS内部软驱设置错误
　　CMOSchecksumerror-efaultsloaded.CMOS校验错误，装入缺省(默认)设置
　　二、BIOS刷新失败后，Bootblock启动时出现的提示信息
　　提示信息说明
　　Detectingflo ydriveAmedia...检测软驱A的格式
　　Drivemediais:1.44Mb1.2Mb720Kb360K驱动器格式是1.44Mb、12Mb、720kb、360kb的一种
　　DISKBOOTFAILURE,INSERTSYSTEMDISKANDPRESSENTER磁盘引导失败，插入系统盘后按任意键继续
　　三、MBR主引导区提示信息
　　提示信息说明
　　Invalidpartitiontable无效的分区表
　　Errorloadingoperatingsystem不能装入引导系统
　　Mi ingoperatingsystem系统引导文件丢失
　　说明：如果在计算机启动过程中，在硬件配置清单下方(也就时在平时正常启动时出现StartingWindows98…的地方)出现不可识别字符，此时可判断硬盘分区表损坏。如果你的硬盘上有重要资料，这时你不要轻易进行分区，可找专业的数据恢复公司。
　　四、DOS活动分区中的提示信息
　　提示信息说明
　　Invalidsystemdisk无效的系统盘
　　DiskI/Oerror,Replacethediskandpre anykey.磁盘I/O错误，替换磁盘后按任意键(当C盘系统文件丢失或被破坏时出现该提示信息。这时可能SYSC:为修复系统文件)
　　InvalidMediaTypereachingDriveC:无效的Ｃ盘媒体格式说明。也就是C盘没有格式化或者是其他操作系统的磁盘格式如NTFS
　　InvalidBootDisketteBootFailure无效的启动盘，启动失败
　　五、IO.SYS中的提示信息
　　提示信息说明
　　I ertdiskettefordriveandpre anykeywhenready插入磁盘到驱动器中后按任意键
　　Yourprogramcausedadivideoverflowerror
　　Iftheproblempersists,contactyourprogramvendor你的程序导致溢出错误。如果该问题还存在，请联系你的程序供应商
　　Windowshasdisableddirectdiskacce toprotectyourlongfilenamesWindows不能直接访问受保护的长文件名
　　Thesystemha eenhalted.Pre Ctrl+Alt+Deltorestartyourcomputer系统挂起，按Ctrl+Alt+Del重新启动你的计算机
　　YoustartedyourcomputerwithaversionofMS-DOSincompatiblewiththisversionofWindows.I ertaStartupdiskettematchingthisversionofWindowsandthenrestart你启动的MS-DOS版本与Windows版本不兼容，请插入与Windows版本匹配的系统盘后再重启
　　ThisversionofWindowsrequiresa386orbetterproce or该Windows版本需要386以后的CPU支持
　　A20hardwareerror.Contacttechnicalsu orttoidentifytheproblem地址线A20错误。联系技术支持来识别该问题
　　StartingWindows98...正在启动Windows98……
　　Windows98i owstartingyourMS-DOS-basedprogramWindows98正在启动基于MS-DOS的程序
　　Windows98i owrestarting...Windows98正在重新启动
　　Pre EscnowtocancelMS-DOSmodeandrestartWindows98...按Esc退出MS-DOS模式，重新启动Windows98…
　　ThereisanunrecognizedcommandinyourCONFIG.SYSfile在你的CONFIG.SYS文件中有不可识别的命令
　　ThefollowingcommandinyourCONFIG.SYSfileisincorrect:在你的CONFIG.SYS有下列错误命令
　　Thesectorsize ecifiedinthisfileistoolarge:该文件中指定的扇区太大
　　Thefollowingfileismi ingorcorrupted:WIN.COMCOMMAND.COM下列文件丢失或被破坏：WIN.COM和COMMAND.COM
　　ThereisaninvalidcountrycodeorcodepageinyourCONFIG.SYSfile在你的CONFIG.SYS里有一个无效的国家代码
　　ThereisanerrorintheCOU***YcommandinyourCONFIG.SYSfile在你的CONFIG.SYS里有一个错误的设置国家命令
　　Therei otenoughmemoryfortheCOU***Y.SYSfile没有足够的内存来加载COU***Y.SYS文件
　　RemovesomedriversfromyourCONFIG.SYSfile,andthentryagain请从CONFIG.SYS文件中删除部分驱动程序，然后再试
　　Removesomedrivers,andthentryagain去除一些驱动程序，然后再试。这里的驱动程序是指在CONFIG.SYS中使用device或devicehigh命令加载的程序文件
　　RemovesomediskdriversfromyourCONFIG.SYSfile,andthentryagain从你的(CONFIG.SYS)移去部分程序，然后再试
　　Theconfiguratio ecifiedinyourCONFIG.SYSfileistoolargeformemory调整你的CONFIG.SYS文件以获得足够大的内存
　　Youhavetoomanyblockdevice ecifiedinyourCONFIG.SYSfile调整你的CONFIG.SYS文件以获得blockdevices
　　TheSTACKSsetting(s)inyourCONFIG.SYSfileareincorrect在你的CONFIG.SYS中堆栈设置不正确
　　Defaultstacksettingswillbeusedi tead缺省的堆栈设置将被替代使用
　　ThereisanerrorinyourCONFIG.SYSfileonlineXX在你的CONFIG.SYS里XX行错误
　　Warning:Logicaldrive astZexistandwillbeignored警告：逻辑驱动器Z已经存在，将被忽略
　　TypethenameoftheCommandInterpreter(e.g.,C:\WINDOWS\COMMAND.COM)Pre anykeytocontinue…请输入命令解释器的文件名(如：C:\WINDOWS\COMMAND.COM)后，按任意键继续
　　Windowsi ypa ingyourstartupfiles
　　Minimalnetworksu ortwillbeloadedifavailableWindows正在跳过你的启动文件。如果网络可用，最小网络支持将被加载
　　Windowsi tartingthecommandpromptonlyWindows正在启动命令字符模式
　　WindowswillpromptyoutoconfirmeachstartupcommandWindows将提示你确认每一个启动命令
　　Thecompre iondriverca otbesetupcorrectly压缩驱动程序不能被正确加载
　　GetaversionfromyourvendorthatiscompatiblewiththisversionofWindows从你的供应商那里获得一个与Windows版本相兼容的版本
　　Proce thesystemregistry运行系统注册表
　　Createastartuplogfile(BOOTLOG.TXT)创建启动日志BOOTLOG.TXT文件
　　Proce yourstartupdevicedrivers(CONFIG.SYS)运行CONFIG.SYS文件中的设备驱动
　　Proce yourstartupcommandfile(AUTOEXEC.BAT)运行AUTOEXEC.BAT中的启动命令
　　LoadtheWindowsgraphicaluserinterface装入WINDOWS图形用户界面(GDI)
　　Warning:Windowshasdetectedaregistry/configurationerror.Choose,Commandpromptonly,andrunSCANREG警告：Windows检测到一个注册表或配置错误选择DOS操作模式，运行SCANREG
　　Warning:Windowshasdetectedacompre eddriveacce error.ChooseSafemodecommandpromptonly,tohelpyouidentifytheproblem警告：Windows检测到一个访问压缩驱动器错误，选择安全模式下的MS-DOS，来帮助你识别这个问题
　　Warning:Windowsdidnotfinishloadingonthepreviousattempt.ChooseSafemode,tostartWindowswithaminimalsetofdrivers警告：Windows在刚才尝试后不能够完成加载，选择安全模式，用最小驱动启动你的电脑
　　Warning:Windowsmulti-bootmaynotfunctioncorrectly
　　Checkforsystemfilesinyourrootdirectorywithconflictingexte io 警告：Windows不能够正确完成多系统启动，在你的ROOT目录里检查不一致的系统文件
　　Warning:thesystemconfigurationmanagerfailedtorun.Someofyourreal-modedevicedriversmaynotinitializeproperly警告：系统管理器运行失败，一些实模式驱动可能没有正确初始化
　　TheBUFFERSsetting(s)inyourCONFIG.SYSfilearetoolarge.Defaultbuffersettingswillbeusedi tead在你的CONFIG.SYS里BUFFER设置太大。默认的BUFFER缓冲器设置将被使用
　　Amemoryallocationerroroccurredduringstartup
　　RestartyourcomputerandselectInteractiveStarttoidentifytheproblem在启动过程中内存分配发生错误，请重新启动你的计算机然后选用交互式方式启动来确定故障原因
　　Warning:thehighmemoryarea(HMA)i otavailableAdditionallowmemory(below640K)willbeusedi tead警告：高端内存不可用，低端内存将被代替使用
　　Therei otenoughmemoryforWindows.RemovesomedriversfromyourCONFIG.SYSfile,andthentryagain对Windows来说没有足够的内存，请从CONFIG.SYS文件中移去部分加载的程序，然后再试着启动你的读入计算机
　　YourpreviousMS-DOSfileswerenotfound.旧的MS-DOS文件没有找到，这常见于使用双启动的系统，另一个系统是DOS6
　　YourpreviousMS-DOSversioni otsu orted.MS-DOSstartupfailed旧的MS-DOS版本不支持。MS-DOS启动失败
　　NowloadingyourpreviousversionofMS-DOS,pleasewait现在正在加载旧的MS-DOS版本，请等待
　　InvalidsettingintheMSDOS.SYSfile:Aninternalstackoverflowhascausedthi e iontobehaltedMSDOS.SYS文件中无效的设置选项。系统堆栈溢出，系统挂起
　　ChangetheSTACKSsettinginyourCONFIG.SYSfile,andthentryagain请改变CONFIG.SYS文件中的STACK设置，然后再试
　　Stackoverflow堆栈溢出
　　Integerdivideby0整数被0除
　　Notenough aceforenvironment没有足够的空间
　　Run-timeerror运行错误
　　Floating-pointsu ortnotloaded浮点运算支持没有装入
　　Nullpointera ignment无效的断点分配
　　六、COMMAND中的提示信息
　　提示信息说明
　　Stackoverflow堆栈溢出
　　Integerdivideby0分母是0
　　Notenough aceforenvironment磁盘没有足够的空间
　　Run-timeerror时钟错误
　　Nofixeddisk resent没有硬盘存在
　　I ufficientmemory内存不足
　　Invaliddrive ecification无效的驱动器名
　　Invalidcharactersinvolumelabel无效的盘符
　　InvalidVolumeID无效的卷标ID号
　　Notargetdrive ecified目标驱动器没有定义
　　mi ingoperatingsystem系统文件丢失
　　No ystemDiskorDiskError不是系统盘或磁盘错误
　　ReplaceDiskandPre AnykeyToReboot替换磁盘，按任意键重新启动
　　七、SYS传送系统文件时的提示信息
　　提示信息说明
　　Ca otfindSystemFiles不能找到系统文件
　　Systemtra ferred系统传送完毕
　　Disku uitableforsystemdisk目标磁盘不适合做系统盘
　　八、FORMAT中的提示信息
　　提示信息说明
　　UnabletowriteBOOT.不能写引导扇区
　　Invalidmediatype无效的磁盘类型
　　Parameter otsu orted参数不支持
　　Ca otformatanetworkdrive不能格式化网络驱动器
　　InvalidmediaorTrack0bad-diskunusable无效的磁盘或０磁道损坏，磁盘不可用
　　Formatterminated格式化终止
　　DiskBootfailure磁盘BOOT区错误
　　Invalidsystemdisk无效的系统磁盘
　　DiskI/Oerror，Replacethedisk,andthen
　　pre anykey磁盘I/O错误，请换盘后按任意键。通常在读写软盘时出现此类错误
　　Non-Systemdiskordiskerror，Replaceandstrikeanykeywhenready无系统的磁盘或磁盘错误，请替换后按任意键
　　Toomanyopenfiles打开的文件太多
　　Acce deniedI ufficientmemory没有足够的内存访问被拒绝
　　Invaliddrive ecification无效的盘符说明
　　ParseErrorXX分析错误XX
　　IncorrectMS-DOSversion不正确的MS-DOS版本
　　X％percentcompleted格式化正在进行，已经完成X%
　　Formatcomplete.格式化完成
　　XXbytesi adsectorsXX字节的坏扇区
　　XXbytestotaldisk ace磁盘的全睰占湮猉X字节
　　XXbytesavailableondisk磁盘的可使用空间为XX字
　　Volumelabel(11characters,ENTERfornone)?请输入磁盘卷标(总共11个字符，按回车为空)
　　Formatnotsu ortedondriveXFormat命令不支持驱动器X
　　Invaliddeviceparametersfromdevicedriver无效的设备驱动参数
　　ErrorwritingFAT写FAT表错误
　　Errorwritingdirectory写DIR目录表错误
　　Ca otformatanASSIGNorSUBSTdrive不能格式化ASSIGN和SUBST指定的驱动器
　　Ca otfindSystemFiles没有找到系统文件
　　Ca otformatanetworkdrive不能格式化网络驱动器
　　Invalidcharactersinvolumelabel磁盘卷标中存在非法字符
　　Parameter otsu orted参数不支持
　　Formatterminated格式化意外终止
　　Disku uitableforsystemdisk这个磁盘不适合作为系统盘
　　UnabletowriteBOOT不能写BOOT区
　　Errorreadingdirectory读DIR目录区错误
　　Notargetdrive ecified目的驱动器没有说明
　　andpre ENTERwhenready准备好后按回车键
　　Systemtra ferred系统传送完毕
　　EntercurrentvolumelabelfordriveX请为驱动器X输入磁盘的卷标
　　Parameter otcompatiblewithfixeddisk参数与硬盘不兼容
　　VolumeSerialNumberisXXXX分区格式化时随机产生的序列号是：XXXX
　　Formatbroken格式化被强行终止
　　FormatnotavailableondriveXX不能在驱动器XX上使用格式化命令
　　on-Systemdiskordiskerror没有系统盘或磁盘错误
　　BadPartitionTable错误的硬盘分区表
　　Parameter otsu ortedbydrive该驱动器不支持这些参数
　　I ertDOSdiskindriveA请在驱动器A中插入DOS系统盘
　　WARNING,ALLDATAONNON-REMOVABLEDISKDRIVE%1:WILLBELOST!Proceedwith警告：硬盘分区X中的所有数据都将丢失，确定执行格式化命令吗?
　　Formatanother(Y/N)?!还格式化其他盘吗
　　Errorreadingpartitiontable读硬盘分区表错误
　　Errorwritingpartitiontable写硬盘分区表错误
　　Parameter otcompatible参数不匹配
　　XXallocationunitsavailableondisk磁盘上有XX可用簇
　　XXbytesineachallocationunit每个簇有大小为XX字节
　　Sameparameterenteredtwice相同的参数被输入两次
　　Mustenterboth/Tand/Nparameters/T和/N参数必须同时使用
　　Therei otenoughroomtocreatearestorefile没有足够的空间来建立恢复文件
　　YouwillnotbeabletousetheUNFORMATutility你将不能使用UNFORMAT工具来恢复你的硬盘数据
　　Therei otenoughdisk aceforsystemfiles没有足够的空间来存储系统文件
　　Thisdiskca otbeunformatted这个磁盘不能被反格式化
　　Therewasanerrorcreatingtheformatrecoveryfile在建立恢复文件时产生了一个错误
　　Volumelabeli otsu ortedwith/8parameter该驱动器不支持/8参数
　　I ufficientmemorytoloadsystemfiles没有足够的内存装入系统文件
　　I ufficientmemory.内存不足
　　Calculatingfree ace(thismaytakeseveralminutes)...正在统计磁盘空间(可能要花上几分钟时间)
　　九、FDISK中的提示信息
　　提示信息说明
　　DeletePrimaryDOSPartition删除主DOS分区
　　DeleteExtendedDOSPartition删除扩展DOS分区
　　DeleteLogicalDOSDrive(s)intheExtendedDOSPartition删除逻辑DOS分区
　　WARNING!DatainthedeletedPrimaryDOSPartitionwillbelost警告：主DOS分区的数据将全部丢失
　　WARNING!DatainthedeletedExtendedDOSPartitionwillbelost.Doyouwishtocontinue(Y/N)?警告：扩展分区中的数据将全部丢失，你真的继续吗
　　DeleteLogicalDOSDrive(s)intheExtendedDOSPartition删除扩展分区下的逻辑分区
　　WARNING!DatainadeletedLogicalDOSDrivewillbelostWhatdrivedoyouwanttodelete?Areyousure(Y/N)?警告：逻辑分区中的所有数据都将丢失，你删除哪个驱动器？你真的确定吗
　　Di layPartitionInformation显示分区内容信息
　　TheExtendedDOSPartitioncontai LogicalDOSDrives.扩展DOS分区中包含DOS逻辑分区
　　Doyouwanttodi laythelogicaldriveinformation(Y/N)?你想显示逻辑分区的信息吗
　　Di layLogicalDOSDriveInformation显示逻辑分区信息
　　Enterpartitio izeinMbytesorpercentofdisk ace(%)tocreateaPrimaryDOSPartition...输入所建立主DOS分区的容量，单位是百分比
　　EnterlogicaldrivesizeinMbytesorpercentofdisk ace(%)...请输入逻辑分区容量大小或磁盘空间的百分比
　　EnterVolumeLabel?请输入卷标
　　Enterpartitio izeinMbytesorpercentofdisk ace(%)tocreateanExtendedDOSPartition....请输入扩展DOS分区的容量大小或磁盘空间的百分比
　　DoyouwishtousethemaximumavailablesizeforaPrimaryDOSPartition你想使用全部磁盘空间作为主DOS分区吗
　　ChangeCurrentFixedDiskDrive.EnterFixedDiskDriveNumber(X)当你挂接两个以上硬盘时，在FDISK的系统菜单中将多一个第5项，选择第5项时，将提示：请输入硬盘的序号
　　FixedDiskDriveStatus硬盘状态
　　DatainthedeletedPrimaryDOSPartitionwillbelost.Whatprimarypartitiondoyouwanttodelete?Doyouwishtocontinue(Y/N)?DOS主分区中的数据将全部丢失。你准备删除哪个主分区？你想继续吗
　　DatainthedeletedNon-DOSPartitionwillbelost.WhatNon-DOSpartitiondoyouwanttodelete?Doyouwishtocontinue(Y/N)?非DOS分区的数据将全部丢失。你准备删除哪一个非DOS分区？你要继续吗
　　YouMUSTrestartyoursystemforyourchangestotakeeffect你必须重新启动你的计算机你所做的所有改变才有效
　　Anydrivesyouhavecreatedorchangedmustbeformatted你新建的分区或改变的分区必须被格式化后才可用
　　ShutdownWindow eforerestarting在重启之前请关闭Windows
　　Yourcomputerhasadisklargerthan512MB.ThisversionofWindowsincludesimprovedsu ortforlargedisks,resultinginmoreefficientuseofdisk aceonlargedrives,andallowingdisksover2GBtobeformattedasasingledrive你的计算机挂接了一个大于512M的硬盘。该版本的Windows支持大硬盘，能够更有效的使用大硬盘上的磁盘空间，并充许单个分区大于2GB
　　Pre EsctoexitFDISK按Esc退出FDISK
　　ThisdriveisFAT16bydefault,switchtoFAT32(Y/N)?这个驱动器默认是FAT16模式，真的转换为FAT32模式吗
　　ThisdrivemustbeFAT32becauseit izei gt;2048MB当分区的空间大于2048MB时，这个分区必须使用FAT32磁盘数据格式
　　ThisdrivemustbeFAT16becauseit izeistoosmalltobeFAT32因为这个分区对于FAT32格式来说太小，所以这个分区只能使用FAT16格式
　　Verifyingdriveintegrity,complete正在校验分区的完整性，完成
　　YourcomputerhasNTFSpartitio whichmayrequirelargedrivesu ort.Ifyouareusinganotheroperatingsystem,suchasWindowsNT,whichsu ortslargedrivesyoushouldenabletreatingthesepartitio aslarge你的计算机有一个NTFS分区可能需要大分区支持，如果你正在使用其他操作系统，如WindowsNT，你应该把这些分区分大一些
　　NOTE:Ifyoua werYandthepartitiondi laylooksincorrectorahangorcrashoccursdonothing,runFDISKagain,anda werNtothisquestion注意：如果你回答Y，可能显示的分区信息看上去不正确或系统挂起或什么动作也没有，这时你可再次运行FDISK，对这个问题用N回答
　　ShouldNTFSpartitio onalldrive etreatedaslarge(Y/N)?对所有的NTFS分区使用大分区模式
　　Drivedeleted驱动器被删除
　　Partitionmadeactive分区X被设置为活动
　　PrimaryDOSPartitioncreated主DOS分区被建立
　　ExtendedDOSPartitioncreated扩展DOS分区被建立
　　LogicalDOSDrivecreated,driveletterschangedoradded逻辑分区被建立，驱动器的盘符可能被改变或有新的增加
　　Nopartitio defined没有分区被定义
　　Nologicaldrivesdefined没有逻辑驱动器被说明
　　Drivelettershavebeenchangedordeleted驱动器盘符已经被改变或删除
　　Noactivepartitio 没有设置活动分区，该硬盘不能被启动
　　Nofixeddisk resent没有硬盘
　　Errorreadingfixeddisk读硬盘错误
　　Errorwritingfixeddisk写硬盘错误
　　Writeprotecterrorwritingfixeddisk写硬盘写保护错误
　　IncorrectDOSversion不正确的DOS版本
　　Ca otFDISKwithnetworkloaded不能对网络驱动器使用FDISK
　　No acetocreateaDOSpartition没有足够的空间建立DOS分区
　　Requestedlogicaldrivesizeexceedsthemaximumavailable ace输入的逻辑驱动器的容量超过了最大可用的磁盘空间容量
　　Requestedpartitio izeexceedsthemaximumavailable ace输入的分区的容量超过了最大可用的磁盘空间容量
　　Nopartitio todelete已经没有分区可以被删除
　　TheonlystartablepartitiononDriveisalreadysetactive硬盘X上的惟一的可启动分区已经被标记为活动(扩展分区不能被设置为活动)
　　Nopartitio tomakeactive没有分区可以被标记为活动分区
　　Partitio electedi otstartable,activepartitio otchanged输入的分区X不可启动，当前的活动分区没有被改变
　　Ca otcreateExtendedDOSPartitionwithoutPrimaryDOSPartitionondiskX在硬盘X上没有主DOS分区时不能建立扩展DOS分区
　　Allavailable aceintheExtendedDOSPartitionisa ignedtologicaldrives扩展分区的全部有效空间都分配给逻辑驱动器吗？还可以再分为主分区或其他分区
　　Ca otdeleteExtendedDOSPartitionwhilelogicaldrivesexist因为扩展分区下有逻辑分区存在，所以扩展分区不能被删除
　　AlllogicaldrivesdeletedintheExtendedDOSPartitioni otachoice.PleaseenterX确定删除哪一个逻辑分区，请输入X
　　WARNING!Thepartitio etactivei otstartable警告：被设置为活动的分区是不可启动的
　　Onlynon-startablepartitio exist只有不可启动的分区存在
　　Onlypartitio onDrive1ca emadeactive只有硬盘1上的分区可被设置为活动。当你挂接两个以上硬盘时，使用FDISK命令时只能设置硬盘1中的某个主分区为活动，其他硬盘上的主分区都不能设置为活动
　　MaximumnumberofLogicalDOSDrivesi talled逻辑驱动器的所有盘符都使用，意思是你在分区时驱动器的盘符超过了Z
　　Ca otcreateazerosizepartition不能建立大小空间为0的分区
　　Unabletoacce DriveX不能访问驱动器X
　　Ca otdeletePrimaryDOSPartitionondrive1whenanExtendedDOSPartitionexists当扩展分区存在时不能删除硬盘1上的主DOS分区
　　Invalidentry无效的输入
　　Volumelabeldoe otmatch标不匹配。当你删除分区时，系统会提示输入该分区的卷标，如果输入的巻标和你要删除的分区的卷标不一致时，操作将不能进行
　　Ca otcreateLogicalDOSDrivewithoutanExtendedDOSPartitiononthecurrentdrive没有扩展分区时不能在当前硬盘上建立逻辑驱动器
　　Couldnotchangepartitio ,becausethediskcouldnotbelocked不能改变分区，因为该硬盘不能被锁定
　　Internalerror内部错误
　　IncorrectMS-DOSversion不正确的MS-DOS版本
　　Invalidparameter无效的参数
　　Ca otFDISKwithnetworkloaded不能对网络驱动器进行FDISK
　　ThemasterbootcodehasNOTbeenupdated
　　/STATUSDi lay artitioninformation主引导区代码没有被更新。显示分区信息
　　/XIgnoresextendeddisk-acce u ort.Usethi witch不使用扩展磁盘访问指令支持。当你使用
　　ifyoureceivediskacce orstackoverflowme ages这个参数时你将看到堆栈溢出的信息
　　/MBRand/CMBRca otbothbe ecified/MBR和/CMBR这两个参数不能同时使用
　　/MBRonlyoperatesondrive1,use/CMBRforotherdrives只能对硬盘1使用，/CMBR对其他硬盘使用/MBR
　　Youmust ecifyadrivenumberwith/CMBR
　　Invalidpartitiontable在使用/CMBR参数时必须说明硬盘的序号。无效的硬盘分区表
　　Errorloadingoperatingsystem在装入操作系统时错误
　　Mi ingoperatingsystem操作系统文件丢失
　　stackoverflow堆栈溢出
　　integerdivideby0整数被0除
　　run-timeerror运行错误
　　notenough aceforenvironment没有足够的空间-----
　　　　　　　　　　
以出世的态度做人，以入世的态度做事。
标题： 回复：
6 附件：
用户名：
留联系方式
密码： | | | | | | | Copyright2005-2011 360.CN All Rights Reserved 360安全中心
京公网安备110000000006号The official blog for Small Busine Server (SBS) su ort and product group communicatio .
Search Form
Search In:
Everything
Grou Places
Date range:
All Time
Last Year
Last 6 Months
Last 3 Months
Last Month
Last Week
Last Two Days
Search this blog
Search all blogs
Social Media Sharing
SBS Related Links
SBS-Related Links
EPS Team Blogs
Optio Disclaimer
Disclaimer:
This posting is provided AS IS with no warranties, and confers no rights. This weblog does not represent the thoughts, intentio , pla or strategies of Microsoft.
Use of included script samples are subject to the terms ecified at http://www.microsoft.com/info/cpyright.htm
You May Get an Error Verify that the Source Server Name is Correct While Trying to I tall SBS into an Existing Domain
You May Get an Error Verify that the Source Server Name is Correct While Trying to I tall SBS into an Existing Domain
Rate This
8 Feb 2011 6:46 AM
Comments
[Today's post comes to us courtesy of Rod White and Damian Leibaschoff from Commercial Technical Su ort]
When migrating to Small Busine Server 2011 standard you may receive the following error me age.
Ca ot find the Source Server
Verify that the Source Server name is correct, and then try again.
The problem is usually due to a timing i ue. The network card is provisioned with DNS servers right before a ping of the source server name is attempted. In some cases, the network card is not yet ready to handle this. When this ha e , an exception will ha en and the error will be di layed.
Resolution:
The first thing you should do is acknowledge the error by pre ing
and then
wait at least 30 seconds
before clicking Next
to proceed again. If you receive the same error a second time, then it is most likely NOT the i ue described in this article and further troubleshooting would be required to understand why the new server is failing to ping the source server.
To confirm you are experiencing this i ue you can check the SBS Setup log by doing the following ste : 1. Pre Shift + F10 to open a command prompt.
notepad C:\Program Files\Windows Small Busine Server\Logs\SBSSetup.log
Look for the following exception stack trace:
[..] Setup: Pinging old server name.
Setup: InvalidOperationException while pinging: System.Net.NetworkInformation.PingException: An exception occurred during a Ping request. --- System.Net.Sockets.SocketException: The requested name is valid, but no data of the requested type was found at System.Net.D .InternalGetHostByName(String hostName, Boolean includeIPv6) at System.Net.D .GetHostAddre es(String hostNameOrAddre ) at System.Net.NetworkInformation.Ping.Send(String hostNameOrAddre , Int32 timeout, Byte[] buffer, PingOptio optio ) --- End of i er exception stack trace --- at System.Net.NetworkInformation.Ping.Send(String hostNameOrAddre , Int32 timeout, Byte[] buffer, PingOptio optio ) at System.Net.NetworkInformation.Ping.Send(String hostNameOrAddre ) at Microsoft.WindowsServerSolutio .Setup.SBSSetup.MigrationInformationPagePresenter.ValidateServerName(Boolean runCostlyValidation)
If you are not seeing this exception and still getting the same error, verify that you can resolve the name of the source server properly:
Select Shift + F10 to open a command prompt.
Ping the Source Server Netbios name (i.e. SBS2003).
Ping the Source Server internal FQDN (i.e. SBS2003.R2.local).
Make sure you have not mi elled the name of the source server or internal domain.
Comments
Henri Fournier
8 Feb 2011 11:45 AM
I just ran into this over the weekend. Following advice I found on Susan Bradley' blog (SBS Diva), I hit Shift-F10, typed explorer.exe, then navigated to the Control Panel and set the correct time on the server. Problem solved.
Also, another problem that can come up at this same stage, make sure that Netbios is Enabled on the source servers network adapter.
Thomas Francois
11 Feb 2011 5:50 AM
I just wanted to take a moment and let you know how helpful that your advice has been. Your site is full of fantastic information. Thank you very much and keep up the good work!
Regular reader, first time commenter...
Thomas Francois
Marketing Director
Web Price Right
www.we ricedright.com
16 Feb 2011 8:25 AM
I ca #39;t get past this error. I can ping the IP addre of the source SBS server, no problem. I can ping the FQDN of the source SBS server, but not the Netbios name. I have enabled Netbios on the source server adaptor. I have created a static WINS and static DNS entry for the Netbios of the source server on the source server. On the source server I can succe fully ping itself by Netbios name. I have rebooted both servers several times, clear DNS cache, registered DNS. I have verified time, date and timezone are equal on both servers. No luck. What a headache.
16 Feb 2011 8:33 AM
I finally got it.
Go to command prompt, fire up explorer.exe, open control panel in c:\windows\system32, edit the adaptor settings. In my case, there was no gateway defined, I enabled Netbios and ecified a WINS server. Problem solved.
21 Feb 2011 2:32 PM
Different I ue fixed this problem for me
Cntl-Shft -Esc to bring up Task Manger
Run CMD
Time -matched with Source DC time manually
Date - matched with Source DC manually
This was under a VMware Esxi 4.1 hypervisor that did have time matched in the hypervisor??
Jan Pilar
25 Feb 2011 2:56 AM
If you have miscorrect configured time zone on new SBS 2011 during migration, date or time you could see error " ing OK, networking might not ready with three time quot;. Correct time, date or time zone and everything is OK.
Page 1 of 1 (6 items)
2011 Microsoft Corporation.an error occurred in the remote desktop activex control i talled on your computer
an error occurred in the remote desktop activex control i talled on your computer
2009年6月5日 23:32 Hello
I have reviewed all previous listings of this error me age, but to no effect.
I have just i talled the latest version of whs on an old pc and all seems ok. However when trying to co ect to the server using Windows Home Server Co ole on an XP based machine I get the me age an error occurred in the remote desktop activex control i talled on your computer
I ca ot believe that this has all been tested for your average home user. The i tallation on the server is not easy and would have put off almost everyone I know and then to be confronted with this error me age would cause any normal home user to throw in the towel.
There must be a solution that does not involve significant technical knowledge. I have many friends who like the idea of WHS, but my experience so far is to advise keeping well away.
Can someone please come up with a solution to this problem.
regards
PS I have tried all of the techie suggestio so far published but with no result. Maybe Ubuntu is the solution! ***
2009年10月28日 1:55 Woo ! It was
's a wer:
regsvr32.exe mstscax.dll
Worked like a charm.
From Microsoft Tech net the command runregsvr32 %systemroot%\system32\mstscax.dll that is the proper format! This is what worked for me, the error was An Error Occured In The Remote Desktop Active X Control I talled On Your Computer. And also Rhyseti's Post with yhe link he has posted: navigate to registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
Add a new “Expandable String value” i ide the above mentioned key with a value name of “A Data” and a value data of “%USERPROFILE%\A lication Data”. This solved several problems including Pa word Retention Problems. Hope this hel some.
regards,
已建议为***
2009年11月6日 23:53
已标记为***
2010年1月28日 23:27 全部回复
2009年6月6日 0:32 Hello
I have reviewed all previous listings of this error me age, but to no effect.
I have just i talled the latest version of whs on an old pc and all seems ok. However when trying to co ect to the server using Windows Home Server Co ole on an XP based machine I get the me age an error occurred in the remote desktop activex control i talled on your computer
I ca ot believe that this has all been tested for your average home user. The i tallation on the server is not easy and would have put off almost everyone I know and then to be confronted with this error me age would cause any normal home user to throw in the towel.
The i tallation of WHS is not for the average home user at all. That's precisely why it's not a retail product in the first place. When you buy an OEM product,
are the su ort and
are expected to know what you're doing. If you don't, you should purchase a pre-built server (that comes with su ort) i tead.
There must be a solution that does not involve significant technical knowledge. I have many friends who like the idea of WHS, but my experience so far is to advise keeping well away.
See above comment.
Can someone please come up with a solution to this problem.
regards
PS I have tried all of the techie suggestio so far published but with no result. Maybe Ubuntu is the solution!
Have you tried opening the Co ole from a different client? Exactly what point do you get the me age (as soon as you open the Co ole, after entering the pa word, etc)? 2009年6月6日 1:37 I am getting the same error when trying to log onto WHS from main desktop PC where the co ector software is i talled.
Ru ing XP, IE 7.0. Geeting the error when entering the pa word. 2009年6月6日 9:47 Hi Thanks for your comments, yes I realise that I have to provide my own su ort. However if I purchased a ready built server would the retailer come out and set up my clients? I think not.
Aside from that..
The error does not occur when the server is down, so the client must have co ected. I can also get the pa word hint.
the error comes when I hit enter or click on the button, it does not matter if the pa word is correct or not.
I hope that hel Many thanks
regards
Update... works fine on another client also ru ing xp
Update 2... Works on xp home but not on xp media center, if that hel 已编辑
2009年6月6日 11:04 2009年6月6日 16:29 Hi Thanks for your comments, yes I realise that I have to provide my own su ort. However if I purchased a ready built server would the retailer come out and set up my clients? I think not.
No, but a pre-built system would come with step-by-step i tructio that tells the average home user how to do just that.
Aside from that..
The error does not occur when the server is down, so the client must have co ected. I can also get the pa word hint.
the error comes when I hit enter or click on the button, it does not matter if the pa word is correct or not.
I hope that hel Many thanks
regards
Update... works fine on another client also ru ing xp
Update 2... Works on xp home but not on xp media center, if that hel See bru er's post in thethread
(there are 2 different suggestio totry in that thread). 2009年6月7日 9:37 Thanks for the link, but unfortunately neither of the suggestio made any difference
Regards
David 2009年6月7日 16:06 Thanks for the link, but unfortunately neither of the suggestio made any difference
Regards
What is your default web brosweron the computer that is not working? You might try resetting the settings in Internet Explorer (which is where ActiveX is i talled). (Tools Internet Optio Advanced Reset) 2009年6月7日 21:24 Hi
Many thanks for your help, I do a reciate it
I have been having problems with ie8, it kee telling me that my search providers are corrupt and opening the search providers maintenance screen, just not got round to sorting it.
However doing the reset has not helped with this i ue. But interestingly my other machine never had the search provider problem, just coincidence perha .
So as the search provider i ue has no solution on the net that I can find I will uni tall ie8 and re-i tall and see if that works
Regards
David 2009年6月9日 10:16 Hi
Uni talling ie8 made no difference, ie7 was restored but Home server co ole still gave the same me age.
Rei talled ie8 and downloaded all the latest updates but the co ole is still giving the ame me age.
Has anyone any other ideas?
Its driving me potty not being able to get acce to my server without VNC'ing to my other machine and ru ing it there
Hope somebody has the solution
Regards
David 2009年6月11日 0:57 Hi
Uni talling ie8 made no difference, ie7 was restored but Home server co ole still gave the same me age.
Rei talled ie8 and downloaded all the latest updates but the co ole is still giving the ame me age.
Has anyone any other ideas?
Its driving me potty not being able to get acce to my server without VNC'ing to my other machine and ru ing it there
Hope somebody has the solution
Regards
Do you know if it ever worked? If so, you might try rolling that client back to an earlier state using the WHS backup feature. It might also be some a you have i talled on that client. 2009年6月11日 8:23 I have seen Remote Desktopi ues on systems, which had a Beta version of Service Pack 3 i talled.
If you click Start/Run and type
, which version is shown here for Windows XP?
Do you use a different firewall than the Windows Firewall on the clients? These may also be a reason by blocking ports needed for the communication.
Which video card is i talled in the server? If it is an NVidia card (or in rare situatio also an ATI), their video drivers may also be a reason for the RDP co ection not working. If you logon locally on the server (which is not su orted), check the event viewer for errors, warnings of all kind around your logon attempts- or informatio about RDPDD.DLL failing to load (the later is a good pointer to the NVidia i ues).
Best greetings from Germany
Olaf 2009年6月13日 1:35 Hi Kariya
No this would be the first time and no a i talled after WHS i tall.
Hi Olaf
Windows reports Version 5.1 (build 2600.x _sgdr.090206-1234 : Service Pack 3) . Hope that hel The video card is a generic card that required no drivers other than that su lied